3M 54187 Multi-Gas/Vapor Cartridge for 6000 7800 FF-400 Full Face Respirators

The 3M multi-gas and vapor cartridge/filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde or hydrogen fluoride and non-oil and oil particulate concentrations up to ten times the Permissible Exposure Limit (PEL) with half facepieces or fifty times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining and primary metals. This multi-gas and vapor cartridge/filter combination works with 3M half and full facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non-oil and oil particulates. The cartridge/filter has been assigned the color code Magenta/Olive in the NIOSH system. Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a federal government regulatory agency, has tested and approved the 3M multi-gas and vapor cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates.

Features:

• NIOSH approved for protection against certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates
• Swept back design allows an enhanced field of view and comfort
• Bayonet compatibility allows use with many 3M half and full face piece designs
• Wide range of applications reduces inventory needs
• Simple installation and usage requirements reduce training needs