Dent Fix DF-1680TC Titanium Carbon Nitride Spot Weld Drill (8 x 45mm)
$34.71
In stock
SKU
DNTDF1680TC
The DF-1680TC titanium carbo nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits. The twist is 10 mm and the shank is 8 mm and has a flat spot on it to be tightened into our DF-15 Series Spot Weld Drills. Our drill bits a specifically designed for the abuse of spot weld drilling.
- Buy 2 for $30.54 each and save 12%
- Buy 3 for $27.42 each and save 21%
WARNING: Cancer and Reproductive Harm
The DF-1680TC titanium carbo nitride (TiCN) coating on this bit will lower friction and keep the edge sharp longer than regular drill bits. The twist is 10 mm and the shank is 8 mm and has a flat spot on it to be tightened into our DF-15 Series Spot Weld Drills. Our drill bits a specifically designed for the abuse of spot weld drilling. Flat ground for strength, centering nib to prevent walking. These German made spot weld bits are available in 2 sizes 8 mm (DF-1680TC) and 10 mm (DF-1610TC). 8 mm or 0.314 in.
Write Your Own Review
No SDS/TDS file available at this time.